V20 Original Color Yellow V-shaped water-based screen printing ink
一.Suitable for printing materials
PE film, requiring corona treatment ≥38 dynes.
BOPP film, requiring corona treatment ≥38 dynes.
PET film, requiring corona treatment ≥48 dynes.
二. Product characteristics .
1.Free of benzene and other aromatic clusters organic solvents, it is an environmental protection printing ink, which meets the requirements of the American FDA.
2. Excellent and adhesion
3. Abrasion resistance, the surface is not easy to scratch.
4. Good anti-blocking performance, it is not easy to stick together to pressure.
5. No odor
6. Ordinary surface printing ink has a solidification phenomenon when the temperature is low, V type will not have this phenomenon
三. Solvent dilution
Fast drying: 100% alcohol
Slow drying: 90% alcohol 10% water
The ink must be added with an appropriate amount of solvent according to the speed of printing, depending on the speed of printing, the recommended ink printing viscosity is:
Color Zahn cup 2# 16-18 seconds (25℃)
White Zahn cup 2# 15-18 seconds25℃)
The above data is for reference only, users can adjust the proportion of each solvent according to the printing speed, printing environment, etc.
Notes
- If it is an old version, be sure to use the original solvent (or degreaser, flour, etc.) to clean the plate thoroughly.
- The sliding agent and other additives in the co-extruded film have different degrees of influence on the performance of the ink, please pay attention to the choice of printing. The best effect of oil resistance and low temperature resistance can be achieved 24 hours after printing.
- 3. This ink cannot be mixed with other inks. The technical parameters of this document are measured under the conditions of our company. However, since we cannot control the conditions and methods of using our company's products, we cannot guarantee guarantee the technical parameters and various suggestions provided. Our company is not liable for any possible loss or damage, please conduct necessary experiments before use
| Company Name | Shandong Rongxin Ink Co., Ltd. | Country/Region | China |
| Business Type | Manufacturer/Factory | Company Size | 20 |
| Established | July 10, 2020 | ||
| Address | No. 9 Zhangzhou Road, Wendeng Economic Development Zone, Weihai City, Shandong Province, P.R. China | ||
| Main Products | Green environmental protection ink and related consumables | ||
Shandong Rongxin Ink Co., Ltd. is a comprehensive company specializing in the production of environmentally friendly water-based inks and related consumables. The company has long been committed to the development and research of eco-friendly water-based inks, successfully synthesizing modified waterborne polyester and modified waterborne polyurethane, and developing a new type of environmentally friendly ink widely used in flexible packaging printing for food, pharmaceuticals, and daily necessities, serving as a substitute for traditional solvent-based inks. The diluent for these water-based inks uses only purified water and food-grade alcohol, effectively eliminating the environmental and health hazards caused by volatile organic solvents such as benzene, ketones, esters, and ethers present in conventional gravure inks. With the implementation of China's new "Air Pollution Prevention and Control Law," the company's products represent the optimal choice for the printing industry to meet environmental regulations.
Send Inquiry
