碧丽 Diamond Shield Face Oi lWaterproof, oil-repellent, weather-resistant, scratch-resistant, non-drip

Product Description:◆ Forms a film at room temperature by self-drying; the cured coating is transparent and features strong water and oil repellency as well as anti-graffiti self-cleaning properties.◆ Suitable for rough surfaces prone to adhesion.◆ Resistant to high temperatures, aging, yellowing, corrosion, solvents, water immersion, and scratching; outdoor exposure to wind, sun, and rain does not cause yellowing, with stable performance.◆ Ultra-low odor, made of pure silicone ingredients, safe, environmentally friendly, and non-toxic.◆ Strong hydrophobic and oleophobic properties, water contact angle >100°; resistant to oil pens, tea stains, coffee, adhesives, and other stubborn stains; easy to clean and wash.Application Scope:◆ Granite paint, exterior stone-like paint, exterior wall paint, real stone paint.◆ Interior latex paint, art paint coatings, thermal insulation coatings, etc.◆ Hospitals, school floors, cement surfaces, bridges, municipal projects, etc.◆ Stone processing: marble, artificial quartz, granite, and other rough surfaces.◆ Other materials that require surface protection and treatment.Usage Method:◆ Product mixing ratio: Mix Component A and Component B at a 7:3 ratio and stir thoroughly before application (Note: Do not add water).◆ This product is suitable for thin coatings; thick coatings may crack or have poor adhesion, do not add water. For large-area applications, spraying is recommended, though rolling or brushing is also possible (for 1KG of material, recommended coverage: 15-20 sqm for uneven surfaces, 30-40 sqm for flat surfaces). This product reaches surface dryness in 5-8 minutes and full dryness in about 12-24 hours. The coating performance reaches its optimal state 24 hours after full drying; the longer the self-drying time, the better the anti-graffiti effect.Precautions:◆ This product dries quickly, so after opening the container, it should be sealed immediately to avoid prolonged exposure to air, which may cause crystallization or particles.◆ The material must not come into contact with water or moisture-containing substances, as this will affect the product’s quality or performance.