E301 Original Color Red E Type Water-based Surface Printing Ink
一、There is no need to change the equipment or the version, and the printing speed can reach 60%-8% of the original solvent-based ink.
二、It is suitable for a wide range of printing materials Surface treatment OPP/BOPP film (reatment degree above 38 dyne). CPP film. (treatment degree above 38 dyne) PE (treatment degree above 8 dyne)
三、Application characteristics
1.The use of alcohol and water as diluents is both cheap and environmentally friendly.
2 The residual amount of ink solvent is extremely low, fully meeting the requirements for food packaging.
3. It prints well with all kinds of ink systems.
4. The ink has a high color concentration and brightness, and it is a high-solid, low-viscosity ink. The three primary colors are printed with bright and distinct colors and the reproduction of the photo film and dots is accurate.
5. The ink has good printing transfer performance and stability, excellent compatibility with the scraper, good inkeness, and does not damage the printing plate and the scraper.
四、Diluent formula
Fast-drying: 100%hydrous ethanol (methanol)
Slow-drying: 80% anhydrous ethanol (methanol) 20% purified
Water and alcohol can be mixed in any ratio, mainly depending on the drying capacity of the machine.
Printing viscosity: 3-second cup 3-15 seconds (100-150M/MIN)
Precautions:
1. The corona treatment of the film must meet the or above.
2. The old plate must be thoroughly cleaned first.
3. The ink should be stored in a plastic bucket, not in an iron, to prevent rust.
4. The temperature of the oven should be between 50-70 degrees, and the air volume should be as large as possible
5. When there is a phenomenon of overflow and enlargement of the strokes of the text, the viscosity of the ink can be appropriately increased, the pressure of the roller can be reduced, the angle and hardness of the scraper can be increased.
The technical parameters of this document are measured under the conditions of our company. However, we cannot control the conditions and methods of using our company's products, we cannot guarantee or guarantee the technical parameters and various suggestions provided. Our company is not responsible for any possible or damage. Please conduct necessary experiments before use.
| Company Name | Shandong Rongxin Ink Co., Ltd. | Country/Region | China |
| Business Type | Manufacturer/Factory | Company Size | 20 |
| Established | July 10, 2020 | ||
| Address | No. 9 Zhangzhou Road, Wendeng Economic Development Zone, Weihai City, Shandong Province, P.R. China | ||
| Main Products | Green environmental protection ink and related consumables | ||
Shandong Rongxin Ink Co., Ltd. is a comprehensive company specializing in the production of environmentally friendly water-based inks and related consumables. The company has long been committed to the development and research of eco-friendly water-based inks, successfully synthesizing modified waterborne polyester and modified waterborne polyurethane, and developing a new type of environmentally friendly ink widely used in flexible packaging printing for food, pharmaceuticals, and daily necessities, serving as a substitute for traditional solvent-based inks. The diluent for these water-based inks uses only purified water and food-grade alcohol, effectively eliminating the environmental and health hazards caused by volatile organic solvents such as benzene, ketones, esters, and ethers present in conventional gravure inks. With the implementation of China's new "Air Pollution Prevention and Control Law," the company's products represent the optimal choice for the printing industry to meet environmental regulations.
Send Inquiry
